To SEARCH (on this page): Press Ctrl + F keys (at same time), type item wanted in "Find" box.
The rubber on a phono idler wheel should be not be hard, cracked, or have dents or chunks missing, & it should not have a shiny worn glazed drive surface. Send rebuildable dud phonograph turntable idler drive wheels to Kens Electronics for fresh new rubber molded onto a good hub.
Pictures on this page are shown in order of Outside Diameter to help you identify your drive wheel.
Part numbers on this page were used by GC Walsco; also EVG (Russell Industries); Jensen/Miller and Fife brands. IW-series numbers =PRB brand (Russell Industires).
Part Numbers in bold text are "in-stock" to fill orders promptly after we receive your "dud" tradein.
The exchange price is only for customers who send a trade-in dud to Kens before we fill their order.
Dud & New-Old-Stock Idler purchase: call (269) 345-4609 for potential value before sending to Kens.
Part Numbers in italics usually take 2-8 weeks to get rebuilt.
Bearing Hole size estimation tip:
A 3/32" drill bit measures .094"
A 7/64" drill bit measures .109"
A 3MM machine screw measures .113"
A 1/8" drill bit measures .125"
A #6-32 machine screw measures .134"
A 9/64" drill bit measures .140"
A #8-32 machine screw measures .155"
A 5/32" drill bit measures .156"
A 11/64" drill bit measures .172"
A #10-24 "stove-bolt" machine screw measures .183"
A #10-32 machine screw & 3/16" drill bit measure .187"
A 13/64" drill bit measures .203"
A 7/32" drill bit measures .219"
A 15/64" drill bit measures .233"
A 1/4-20 machine screw measures .247"
Specification Note: "High" is overall Height of an Idler. "Hub" is the Hub/Bearing thickness (inches).
| 107107 RCA Victor turret wheel, 3/4" diameter; has 1/4" ID with setscrew; .455" height | $42.00 rebuild |
| Turntable Phonograph and Tape Recorder Idler Drive Wheels available | |
 | |
| 1456 double phonograph idler wheel 15/16" (.94") Large Diameter; .189" bearing hole. Voice of Music VM 1200-series; Zenith | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | ||
| [1] 1450 phonograph idler drive wheel 1" Diameter, .180" bearing hole, 11/32" (,34") high. Crescent 011888, 550-series | $40=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| The 1450 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1451 Phonograph Idler Drive Wheel 1" Diameter; .180" bearing hole. Crescent 550-series record changers | $40=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | ||
| [1] 1459 Phonograph Idler Wheel 1" Diameter, .187" bearing hole, .768" high Zenith S16921, SL40-28 -29 -30 -31 36 | $40=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| EVG1459 fits Zenith SL40-43 -44 -45 -46 -47 -48 -53 -53FTA -54 -54FTA -56 -59 -60 -61 -62 -63 -64 Cobra-Matic changers | |
| The 1459 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
| 1499-08A idler wheel 1-1/16" (1.06") Diameter, .120" bearing hole, .278" hub thickness Phillips | $42.00=rebuild |
| The 1499-08A idler must be sent in for rebuilding | |
| bearing hole size estimation: 3mm bolt fits loosely in bearing of this idler | |
 | ||
| [13] 1499-51 Phonograph Idler Drive Wheel 1-3/16" (1.1875") Diameter; .082" bearing hole; 1/4" high. | $40.00=exchange | Sell=$60 |
| 1499-51 fits General Electric RS-6572; Show-N-Tell: A615, A615A, A630A, RP1751-1, RP1751B, RP1753-B, RP1783B, RP3010A, RP3011A, RP3012S, RP3070A, RP3120A |
| The 1499-51 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [1] 1454 double phono idler wheel 1-7/16" (1.44") Large Diameter; 9/16" (.56") Small .125 bearing hole. 53/64" high RCA 100176 RP-199 changers | $42=exchange | Sell=$79 |
| The 1454 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [1] 30164 V.M. Double Phono Idler 1.48" Large diameter; 1.04" Small diameter; .12" bearing hole; .82" high | $40=exchange | Sell=$79 |
| The 30164 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| EVG1499-26 Pressure Roller has 1-1/2" (1.50") Diameter; .158" bearing hole, Roberts 52-27 | $42=rebuild |
| bearing hole size estimation: #8-32 machine screw = .155" 5/32" drill bit = .156" | |
 | ||
| [1] 1443 Phonograph Idler Drive Wheel 1-1/2" (1.50") Diameter .187" bearing hole; .417" high | $40.00=exchange | Sell=$79 |
| 1443 fits Philco 45-6559, M-24A, M-26, M-28; Webcor 42P342, 135, 136 | ||
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| The 1443 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
| [3] 1469 phonograph turret 3-speed spindle for Wards-Airline, Webcor 41P1242, Philco 15-1730 (use with 1443 or 1477 idler wheel) | $40=exchange | Sell=$75 |
 | |
| 1427-02 Phonograph Idler Drive Wheel 1-1/2 (1.50") Diameter; .187" bearing hole, RCA | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | ||
| [1] 1499-55 Phonograph Idler Drive Wheel 1-9/16" (1.56") Diameter; .118 bearing hole; 3/8" (.375") high | $40=exchange | Sell=$79 |
| 1499-55 fits Arvin Commodore, Irradlette part number 1136, Model 451 Mini, Super Fonorette Record Eater |
| The 1499-55 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1499-38 Tape Recorder Idler Drive Wheel 1-9/16" (1.56") Diameter; Bell Sound 83B60 | $42=rebuild |
 | ||
| [1] 1452 Phono Idler 1-9/16" (1.56") Diameter; .215" bearing hole: 1/2" high. V.M. 5002, 920, 990; Silvertone K5002, 488.218 | $40=exchange | Sell=$79 |
| The 1452 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1407-12 Phonograph Idler Drive Wheel 1-37/64" (1.578") Diameter; .133" bearing hole | $42=rebuild |
 | |
| EVG1499-25 Pressure Pinch Roller 1-9/16" (1.56") Diameter; .227" bearing hole. Roberts 40-K48 | $42=rebuild |
 |
 |
| 1499-34 =PRB-IW06 | 1499-45 |
| [2] 1499-34 =IW06 Phonograph Idler Drive Wheel 1-9/16" (1.59") diameter; .157" (.16") bearing hole; 5/16" (.30") height | $40=exchange | Sell=$75 |
| bearing hole size estimation: #8-32 machine screw = .155" 5/32" drill bit = .156" |
| 1499-34 =BSR A101623; Philco 325-0125-41; Channel Master; Emerson; Monarch 8M32A 4-speed models; Olympic; Panasonic SE-3160D, Symphonic 8M32A, 1249, 1250, 1251; Zenith |
| 1499-34 (hub may show BSR & ADC) replaces obsolete EVG1499-45; Walsco GC1492-03 |
| The 1499-34 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
| [1] 1499-47 phonograph idler drive wheel 1-19/32" (1.59") Diameter; .150" bearing hole; .257" high | $40=exchange | Sell=$79 |
| 1499-47 fits Benjamin Elac Miracord 10H, 50, 50H, 620V; 10-452-U56, 17-452-4056 |
| The 1499-47 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [1] 1407-09 phono idler wheel 1-19/32" (1.59") Diameter; .156 bearing hole; .257" high | $40=exchange | Sell=$79 |
| 1407-09 fits Delmonico phonograph | ||
| bearing hole size estimation: #8-32 machine screw = .155" 5/32" drill bit = .156" |
| The 1407-09 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [4] 1499-52 Phono Idler Drive Wheel 1-19/32" (1.59") Diameter; .176" bearing hole, 5/16" high | $40=exchange | Sell=$75 |
| 1499-52 fits BSR, General Electric RT2721, RP1799A, RP3030A, RP3060, RP3060A; Magnavox, RCA part no 124191 for VZP-10 |
| The 1499-52 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 |
|
| [1] GC1499-63 phonograph idler drive wheel: 1-19/32" (1.59") diameter;, .177" (.18") bearing hole, .250" high. .120" edge thickness | $40=exchange |
| 1499-63 fits Concord M312 (120, 122) Delmonico 45490B (CTV235, CTV237, CTV239, CTV240, 120, 122B, 224, 234, 642, 1025) |
| The 1499-63 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. |
 | ||
| [10] 1499-64 Phonograph Idler Drive Wheel 1-19/32" (1.59") diameter .177" bearing hole, 5/16" high | $40=exchange | Sell=$60 |
| The 1499-64 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| SFM1915A03 Phonograph Idler Drive Wheel Plastic Hub 1-5/8" (1.57") diameter; .150" bearing hole | $39=Rebuild |
| 1407-13T replacement tire fits SFM1915A03 Fisher Price 825, 835 Gramo Phone | $28.50 |
| SFM1915A03 = SFM1815A03, SFM1915A04; fits Fisher MC-530, MC-720, MC-725; Panasonic SE-1910, SL-H205; Quasar CS7200, CS7400; Sanyo GTX100; Sharp SG-3, JCPenney part #683-1768-00; 853-4992; Sears 304.91946, 304.91969150, 6188242, 6189292; Symphonic |
| uninstalled tire edge thickness .090" with 1" center hole; diameter 1.41 inches. installed diameter 1.57 inches |
 | |
| 1407-06 Panasonic Phonograph Idler Drive Wheel 1.61" diameter; .156" bearing hole; .235" height, Edge thickness .110" | $42=rebuild |
| bearing hole size estimation: #8-32 machine screw = .155" 5/32" drill bit = .156" | |
 | ||
| [1] 1499-54 phonograph idler drive wheel 1-5/8" (=1.62") Diameter; .150" bearing hole; .280" overall height; stepped hub thickness .236" | $40=exchange | Sell=$79 |
| 1499-54 fits Aristo 6F-908, Decca DP151, DP152, DP153, Dyn-Galaxy KP1100, Mastercraft E4999, RP250, National Panasonic IPA004, SG330, 350, 572, Symphonic 2102WA, Yorx |
| The 1499-54 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [9] 1499-53 Phonograph Idler Drive Wheel 1.60" diameter; .190" bearing hole; .30" height, flat hub | $40=exchange | Sell=$65 |
| bearing hole size estimation: #10-24 stove-bolt =.183" #10-32 machine screw & 3/16" drill bit =.187" | ||
| 1499-53 replaces Magnavox 141322-15 in 1P214; also National Panasonic 1PA001 in SG-530, SG-550, SG-551, SG-570, SG-571 | ||
| The 1499-53 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | ||
 | |
| 1486 double phono idler Large=1-5/8" Small=11/16" Diameter; .189" bearing hole; V-M 131, 201, 208A, 210 | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | ||
| [6] 1499-65 Idler 1.63" Diameter; .197" bearing hole, .35" height Sony X34300-25 & X34600-11 for TC105, TC155, TC230, TC252, TC353, TC540, TC630 | $39.00=exchange | Sell=$75 |
| The 1499-65 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
| |
| 1484-01 double take-up wheel 1-11/16"" (1.6875") Diameter .126" bearing hole. Voice of Music VM 700, 1200 tape recorder | $42=rebuild |
 | |
| 1442-02 double 1-11/16" (1.6875") Large Diameter; 1-1/4" Small; .187" bearing hole; 1-1/8" high, Glaser-Steers GS-77; Stromberg-Carlson | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | |
| 1475-01 Tape Rewind Idler 1-11/16" (1.6875") Diameter; .187" bearing hole, Traveller TT-S925, TT-595 | $42=rebuild |
 | |
| 1499-37 (replaces obsolete 1407-02) double idler, 1.68" Large Diameter; .76" Small OD; .22" bearing hole, .93" height; Silvertone 39-107, Webcor | $42=rebuild |
 | ||
| [7] 1499-44 phono idler 1-3/4" Diameter; .120 bearing hole; 3/8" high. =Motorola 49P63020A14 =Zenith 61-908-22 | $39.00=exchange | Sell=$70 |
| The 1499-44 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [0] 108394 RCA Victor: 1.76" diameter; .125" bearing hole, .50" high, .13" edge thickness | $40=exchange | Sell=$85 |
| 108394 fits RCA Victor AP-1, ARC-1000, ARC-2500 45RPM automobile record changers: |
| The 108394 phonograph idler wheel must be sent in for rebuilding |
 |  |
| [2] 1499-09 =GC1453 double idler: Large OD 1.670" with .120" edge thickness; Small OD .700" with .15" edge; .188" bearing hole, .780" height | $42=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| 1499-09 =1453 replaces Voice of Music VM 7435, 9092, 19388 (1551), 21327, 21394, 24700 (early 1200 series changers); Emerson, GE EA97X100, EA97X152, RS1733, RS2885, RS2942; Motorola 49P60023A16, 49R635330, Philco, Symphonic, Zenith |
| The 1499-09 =1453 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [1] 1447 double Idler Large OD =1.75" with .220-240" edge thickness; Small OD =.70" with .18" edge; Bearing Hole .189" Height =.800" | $42=exchange | Sell=$79 |
| 1447 replaces VM 17173, 1123 (for VM625), RCA 74077 (for RP-168, RP-190) Crescent RA-10 (for 6-series) | ||
| bearing hole size estimation: #10-32 machine screw or 3/16" drill bit =.187" |
| The 1447 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1475-02 Take-up Idler 1-3/4" OD; .189" bearing hole. Bell & Howell 785 | $42=rebuild |
| bearing hole size estimation: #10-32 machine screw or 3/16" drill bit =.187" | |
 | ||
| [1] 1499-13 Phonograph Idler Drive Wheel 1-3/4" OD; .240" bearing hole. .305" high. Webcor 146 2200-1 | $40=exchange | Sell=$79 |
| The 1499-13 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1485 Tape Capstan Idler 1-3/4" OD; Voice of Music VM 700-series tape recorders | $42=rebuild |
 | |
| IW14 phonograph idler 1.758" Diameter, .141" bearing hole; .522" high, Admiral & General Electric | $42=rebuild |
 | ||
| [2] 1499-46 Phonograph Idler drive wheel 1-25/32" OD; .139" bearing hole; .715" high | $40=exchange | Sell=$79 |
| 1499-46 = Dual 201104, 207497 (1009, 1010, 1011, 1014, 1015, 1016, 1019) & Dual 27-5131-000 | ||
 |
 |
| [2] 1407-07 | [1] 1499-69 |
| Phonograph Idlers 1.76" diameter; .139 bearing hole, .50" hub height. Dual 1009F, 1010F, 1209, 1210, 1212, 1214, 1215. 217888, 212117 | $40=exchange | Sell=$79 |
| The 1407-07 replaces =1499-69 phono idler is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [2] 1492-01 double idler 1.79" Large OD; .76" Small OD; .188" bearing hole; .95" high; Philco 35-8053-3 for M-39; Symphonic 11X1601 for 1159, 1259; Webcor 11X1697 for 1631, 1641, 1941-1, 1942-1 | $42=exchange | Sell=$75 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| The 1492-01 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 |  |
| 1496-05 | GC1499-58 |
| [4] 1496-05 Phono Idler Drive Wheel 1-7/8" OD; .120 bearing hole; 9/16" high | $40=exchange | Sell=$75 |
| 1496-05 =PRB-IW05, 1492-04, GC1499-58; Voice of Music: 22523, 22915, 24428, 35429, 42136, 45000 (fits VM 1220, 1223, 1230, 1250, 314, 804, 805) Zenith 907-45000-MR |
| The 1496-05 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1447-01 | |
| [1] 1447-01 Phono Idler Drive Wheel 1-7/8" OD; .120 bearing hole; 9/16" high (beveled edge) (VM 22915-A RCA version) RCA 110040 (215-1, RP233-3) | $40=exchange |
 | |
| 1407-13 Phonograph Idler Drive Wheel 1-7/8" OD; .140" bearing hole | $42=rebuild |
 |
 |
 |
| 1407-05 | 1499-72 | PRB-IW11 |
| [1] 1407-05 =IW11 phonograph idler drive wheel 1-7/8" (1.85") diameter; .156" bearing hole; .313" high | $40=exchange | Sell=$75 |
| bearing hole size estimation: #8-32 machine screw = .155" 5/32" drill bit = .156" |
| EVG1407-05 =GC1499-72 fits Garrard CC10, X11, 5-100, 5-200, 5-300, 6-100C, 6-200C, 6-300C, 42MP, 42MS Mini-Changers part number 75633 or 76299 |
| The 1407-05 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1483-01 Phonograph Idler Drive Wheel 1-7/8" OD; .197" bearing hole. Columbia C-690-TR | $39=rebuild |
 |
| 1492-02 Clutch Housing & Bearing Assembly 1-15/16" OD; 9/16" bearing hole Webcor 2800-series |
 | ||
| [7] 1442-01 Record Changer Cycle Gear-Wheel 2" OD; .110" bearing hole; 7/16" high .380" hub | $40=exchange | Sell=$70 |
| 1442-01 =Emerson 962356 (6819126, 819129), General Electric RS3174 (CH45, RP1155C), Glaser-Steers 10001-2 (GS-77), Heath AD-60A, AD-60C, Philco 35-8004-56 (M45) |
| The 1442-01 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 |
||
| [4] 1472-01 [3] IW03 phono idler drive wheel 2" OD; .120" bearing hole. .38"" height | $40=exchange | Sell=$70 |
| 1472-01 fits Califone (small hole); Capital 379-001 (model 118), Crescent 39-3-5 (model 567-37010), Motorola SF13B, Olympic SM130, Roland 410682, Silvertone 30-40-0, 39-3-5, 567-37010, VM 21713, 42235; Westinghouse 690P031, 690V031H32, H32, Zenith FP6VA |
| The 1472-01 =IW03 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [1] 1499-35 =PRB-IW07 Phono Idler Drive Wheel 2" OD; .120" bearing; .390" hub thickness; .48" height | $40=exchange | Sell=$79 |
| 1499-35 fits General Electric EA80X61 (RS-6065) |
| The 1499-35 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 |  |
| 1499-10 | GC1499-41 |
| [1] 1499-10 =IW08 Idler 2" OD .150" bearing hole .377" hub height, Garrard 58220, 75625 75627,(AT6, 50, 60MkII, Zero 100, Syncro Lab-series) | $40=exchange | Sell=$79 |
| GC1499-41 Phonograph Idler Drive Wheel 2" OD; =Philco 325-0143-41 (obsolete number; use 1499-10) |
| The 1499-10 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1407-10 Phonograph Idler Drive Wheel 2" OD; .156" bearing hole | $42=rebuild |
| bearing hole size estimation: #8-32 machine screw = .155" 5/32" drill bit = .156" | |
 | |
| 1407-04 Phonograph Idler Drive Wheel 2" OD; .172 bearing hole | $42=rebuild |
 | ||
| [2] 1447-03 [1] IW09 Phono Idler 2" OD; .180" bearing hole, .41" hub (beveled rubber edge) | $40=exchange | Sell=$75 |
| bearing hole size estimation: #10-24 stove-bolt = .183" |
| 1447-03 fits 45-rpm RCA part number 108602 (RP168, RP190, RP211 thru RP228; 215-1) Philco 325-0143-41 |
| The 1447-03 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
| idler numbers 1447-03 & 1490-03 nearly identical: 1447-03 has beveled upper edge; 1490-03 has square edge |
 | ||
| [2] 1490-03 Phono Idler 2" OD; .180" bearing hole, 7/16" high, .41" hub height, .120" square edge; Admiral 606A, 626A; Zenith | $40=exchange | Sell=$75 |
| bearing hole size estimation: #10-24 stove-bolt = .183" |
| The 1490-03 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [1] 1487 phono idler 2" OD; .182" bearing hole; .487" hub thickness | $39=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" |
| 1487 =Sears 101.761-2, fits Silvertone K3352, 101.211, 101.212; 101.761-3; 488.216. RCA, Voice of Music |
| 1487 has a smaller bearing hole than the similar looking 1432 |
| The 1487 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [2] 1434 Voice of Music VM: 3481, 3481A; 2" OD; .187" shaft; .73" high, .671" hub | $40=exchange | Sell=$75 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| 1434 fits Admiral G400A57, RC150, RC160, RC160A, RC161, RC161A, RC170, RC170A, Crescent, Motorola, Philco, RCA, Seeburg, Silvertone |
| The 1434 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1445 Phonograph Idler Wheel 2" OD; .185" bearing hole, Ball-Bearing HubCap. Garrard T & TA | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 |
 |
| EVG1407-03M =PRB-IW01 | GC1499-71 |
| [7] EVG1407-03M =PRB-IW01 Phono Idler Drive Wheel 2.00" diameter; .18" bearing hole; .350" hub height; .39" high | $42=exchange | sale=$75.00 |
| bearing hole size estimation: #10-24 stove-bolt = .183" |
| 1407-03 fits Califone 1430B, 1440, 1450A, 1470, 1810, 1815, (large hole), RCA 126105 (RP229/230/231); Roberts 9-117-1 (3J, 4J8, 6J7C, 6U-7C, 14M); Newcomb (EDT-15M, EDT-20B, PM-50) |
| 1499-71 obsolete number; interchangable with 1407-03 |
| The 1407-03 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1475 Phono Idler Drive Wheel 2" OD; .187" bearing hole | $39=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| 1475 fits Eicor tape recorder, Silvertone R-63733, 101.774-2, 101.774-3 record changers; Telectro TW424, 400-900 series |
 |
| unknown turntable idler #1 Aproximately 2" diameter, 7/8" high |
 | ||
| [1] 1448 Phono Idler Drive Wheel 2" OD; .187" bearing hole; Collaro 520-series record changer | $40=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | ||
| The 1448 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | ||
 | |
| 1442-03 double Phonograph Idler Drive Wheel 2" OD; .187" bearing hole, Glaser-Steers | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | ||
| [1] 1439-S Phono Idler Drive Wheel 2" OD; .187" bearing hole; 3/8" high/hub | $40=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| 1439 fits Webcor 11X1192, 1134, 1136, 1151, 1121-1 |
| The 1439 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [10] 1433-S idler 2" OD; .182" bearing hole, .4375"=7/16" high .417" hub | $40=exchange | Sell=$65 |
| bearing hole size estimation: #10-24 stove-bolt = .183" |
| 1433 fits: Aero, Bell Sound, Columbia, Coronado, Decca, General Electric RMW-057, P-12, P-13, RCA, Rolland 31-782, Sears Silvertone, Traveller, V-M 2635, 400D, 402D, 404, 405, 800D, Westinghouse |
| The 1433 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1484 double takeup reel drive wheel 2" OD; .188" bearing hole; Voice of Music VM 700 tape recorder | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
| EVG1488-07 phonograph idler drive wheel Voice of Music VM 29522 (725-1 & 726) | $42=rebuild |
 |
| 1441-01 drive wheel 2" OD; .189" bearing hole. Voice of Music VM 710A, 714, 750 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| 78FM21M Motorola phono idler (similar 1432 picture) 2" OD; has .187" bearing hole, .525" high, .484" hub | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | ||
| [18] 1432 =1432-S Voice of Music VM2772 idler 2" OD .215" bearing hole .473" High, .425" hub thickness | $40=exchange | Sell=$65 |
| 1432 fits: Admiral G400A59, RC150, 160, 160A, 161, 161A, 200; Columbia 360 series; Crescent; General Electric; Motorola; Philco; RCA RP-168. RP-176, RP-177, RP-190, RP-197, RP-198; Seeburg; Silvertone; Voice of Music |
| 1432 has a larger bearing hole than the similar looking 1487 |
| 1432 idler; used with: 1460 =VM3139 (78RPM turret); 1461 =VM3140 (45RPM turret): 1462 =VM3141 (33RPM turret) on VM 930 Assembly |
| Picture of VM 930 Turret Assembly near the bottom of this webpage |
| The 1432 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [3] 1490-01 (metal) +[5]=PRB-IW04 (plastic) idler 2" OD; .220" bearing hole; .350" high | $40=exchange | Sell=$75 |
| 1490-01 fits: Admiral, Califone 1430, 1470, 1470A, 1470B, RCA, Newcomb (AV-10, PM-24-2) |
| The 1490-01 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1490-02 idler 2" OD; .220" bearing hole, .340" hub thickness, edge =.125" thickness. Admiral 98B15-48 (RC-604, -606, -624, -626, -636, -644, -654, -664, -674, -676, -684) | $42=rebuild |
| bearing hole size estimation: A 7/32" drill bit measures .219" | |
 | ||
| [17] 1435-S phono idler wheel 2" OD; .220" bearing; .340" hub, .180" edge | $40=exchange | Sell=$60 |
| The 1435 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [2] 1444 2-1/16" OD; .246" bearing hole; .350" high/hub. Garrard 46524 (RC-80) | $40=exchange | Sell=$75 |
| The 1444 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1499-48 Phonograph Idler Drive Wheel 2.10" diameter; .117" bearing hole, .33" height, .12" edge thickness. Telefunken Opus, TW504GT (7042090W) | $39=rebuild |
 | ||
| [6] 1499-66 idler wheel 2.10" diameter; .197" bearing hole; (rubber .25" thick) .415" heighy | $40=exchange | Sell=$65 |
| The 1499-66 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 |
 |
| (bottom view) | (top view) |
| [1] 1499-67 Tape Recorder Idler 2.10" diameter; .197" bearing hole; (rubber 200" thick) .400" high | $40=exchange | Sell=$79 |
| 1499-67 =Sony X00-270-03 (TC101, TC102, TC104A, TC105, TC155, TC200, TC230, TC250, TC540) |
| The 1499-67 idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [1] 1407-11 =IW02 Phono Idler 2-1/8" OD; .120" bearing hole; .440" high | $39=exchange | Sell=$79 |
| The 1407-11 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [3] 1499-74 phono idler drive wheel 2-1/8" OD; .120" bearing hole; 7/16" high | $40=exchange | Sell=$75 |
| 1499-74 fits: Magnavox 76130600, 76130643 (W712) |
| The 1499-74 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [2] 1441 phonograph idler drive wheel 2-1/8" OD; .187" bearing hole; .379" High | $40=exchange | Sell=$75 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| 1441 fits Webcor 11X683 210.2010, 2030, 2110 11X754 2130, 2131, 2132, 2611, 2612; Zenith 10S599 |
| The 1441 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 |
||
| [1] 1437 Phonograph Idler Drive Wheel 2.14" OD; .187" bearing hole, .37" hub thickness, GE, Motorola, Philco, Webcor | $42=exchange | Sell=$79.00 |
| The 1437 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives |
 | ||
| [1] 1483 Idler Drive Wheel 2-1/8" OD; .187" bearing hole; 3/8" high | $40=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| 1483 fits Pentron 964A-115, 9T-3C, 9T-3M, HF400, HT-225, MP-2, PB-1, PB-A2, T-90, TM-56, TR-4, RWN964-A-130 tape recorders |
| The 1483 idler drive wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1483-02 Rewind Drive Wheel 2-1/8" OD; .189" bearing hole. Bell & Howell 785 series | $42=rebuild |
 | |
| 1483-03 Fast Forward Wheel 2-1/8" OD; .189" bearing hole. Bell & Howell 785 | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt =.183" #10-32 machine screw & 3/16" drill bit = .187" | |
| Webster Chicago 100-621 phono idler (2.15" diameter, .370" height. .190 " bearing hole) | $42.00=rebuild |
 | ||
| [2] 1438-S 2.15" diameter .187" bearing hole; .480" height, .13" edge thickness. Columbia, GE, Motorola, Webcor | $40=exchange | Sell=$75 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| The 1438 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
| Bang Olufsen Beogram GR3000 cycle wheel 2.20" diameter, .55" hub height | $42.00=rebuild |
| B&O GR3000 uses RBC25.8 belt to drive the turntable | |
 | ||
| [1] 1440 Phonograph Idler Wheel 2.25" diameter; .187" bearing hole; .15" edge thickness. .37" height. Webcor 11X1201 fits 50, 56, 70, 79, 80, 81, 100, 101, 106, 108, 110, 133, 140, 141, 146, 148, 156, 178, 180, 181, 246, 256, 346, 356, 1135, 1631, 1632 | $40=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | ||
| 1440 idler is used with 1463 (78 rpm), 1464 (45 rpm), & 1465 (33 rpm) turrets |
| The 1440 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| [0] 1479 phono idler drive wheel 2-1/4" diameter .172" bearing hole, 9/16" high | $40=rebuild |
| 1479 =Garrard 53883; fits: Garrard RC-88, RC-98, RC-120, RC-121, Type A, Lab 80 |
| The 1479 phonograph idler wheel must be sent in to be rebuilt | |
 | ||
| [1] 1407-08 Phono Idler Drive Wheel 2-3/8" OD; .125" bearing hole, 9/16" high | $40=exchange | Sell=$79 |
| 1407-08 equals Dual 218237 (fits 1219 & 1229) |
| GC1499-73 phonograph turntable idler drive wheel 2-3/8" OD .138" bearing hole |
| The 1407-08 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1490-07 Phonograph Idler Drive Wheel 2-15/32" OD; .187" bearing hole. Revere | $42=rebuild |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | ||
| [2] 1499-42 phono idler wheel 2.500" diameter; .120" bearing hole; .48" high | $40=exchange | Sell=$79 |
| 1499-42 equals Philco 35-8001-3009, fits model C1, C1SS, C2, C3, N1432, N1434, N1624, N1644, N1705, N1708, N1725, N1727, N1728, N1736, N1740, N1751, N1880, N4946 UN4938, UN4940, UN4942, UN5912 |
| The 1499-42 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 |
 |
 |
| 1449 = | Magnavox C9-027 | = Magnavox C9027 |
| [2] 1449 =IW18 (flat disk) phono idler drive wheel 2.500" OD; .156" bearing hole, .580" high, .120" edge thickness (B14) (130214 H.T.D.) | $40=exchange | Sell=$69 |
| bearing hole size estimation: #8-32 machine screw = .155" 5/32" drill bit = .156" |
| 1449 =Collaro 3199, RC54, 530 3RC531, 54-36, 56-41; Emerson 961425, 961480 for 819098, 819099; Grundig 76130419, 76140283; fits Magnavox 3RC532, TC340, RC440, TC540; Micromatic 522277-1, 522405-1, 522503-1, 523168-1 |
| [1] 1449B (curved domed disk) 2.500" diameter; .156" bearing hole .520" hub height .100" edge thickness, Magnavox | $40=exchange | Sell=$75 |
| The 1449 and 1449B phonograph idler wheels are IN-STOCK for prompt shipment after your dud tradein arrives. | ||
 | ||
| [11] 1491 Cycle Wheel 2.500" OD; .156" setscrew-hole; .380" high. Collaro 3689 RC456, RC54, RC440, TC540 | $40=exchange | Sell=$65 |
| hole size estimation: #8-32 machine screw = .155" 5/32" drill bit = .156" |
| The 1491 record changer cycle wheel is IN-STOCK for prompt shipment after your dud tradein arrives | |
 | ||
| [1] 1499-12 Phonograph Idler Drive Wheel 2-1/2" OD .180" bearing hole. 31/64" high BSR A103227, TD-2 | $40=exchange | Sell=$79 |
| The 1499-12 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [1] 1431 Phono Idler Wheel 2-1/2" OD; .220=7/32" bearing hole; 3/8" high Webcor 45P1530 (110); 1941 General Electric 78RPM | $40=exchange | Sell=$79 |
| The 1431 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1499-81 Gates turntable; Rek-O-Kut Rondine B12; Phono Idler, 2.50" OD; .220" bearing hole; Edge .200" thick; Height .500" | $42=rebuild |
 | ||
| [2] 1430 Phonograph Idler Drive Wheel 2.50" OD; .22" bearing hole; .25" edge thickness, .35" hub thickness | $40=exchange | Sell=$79 |
| 1430 fits: General Industries 22076, GIR70, GIR90, RC130-1, Seeburg M23038, Zenith |
| The 1430 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| 1499-43 Phono Idler Drive Wheel 2-5/8" OD; .120" bearing hole; 1/2" high. Zenith part number 61-254; fits: 169-196, 169-197, 169-211, 169-212, 169-227, 169-228, 169-243, MPS90 | $40=exchange | Sell=$79 |
| Bogen B61 Phonograph idler drive wheel: 2-5/8" OD; .120" bearing hole 5/8" high | $42=rebuild |
 | ||
| [1] 1449-01 Phono Idler Wheel 2-5/8" OD; .187" shaft 3/4" high Wollensak T-1600 | $40=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| The 1449-01 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | ||
| [6] 1499-68 phonograph drive idler wheel 2-5/8" diameter .185" shaft; 13/16" high | $40=exchange | Sell=$70 |
| shaft size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| The 1499-68 phonograph idler wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1490-08 Phonograph Idler Drive Wheel 2-5/8" OD; .187" shaft Revere | $42=rebuild |
| shaft size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 | ||
| [1] 1447-02 Elipsoidal Record Changer Cam Drive wheel 2-1/8" Across; .187" bearing hole; RCA 190-2, 6EY3A, 75764 45-rpm changer | $45=exchange | Sell=$79 |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" |
| The 1447-02 record changer cam drive wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 | |
| 1499-14 Phonograph Idler Drive Wheel 2.64" diameter; .93" height; Garrard part number 55568. for model 4HF | not available |
| 1499-14 replaces obsolete idler wheel 1479-01 | |
 | |
| 1473 Phono Drive Wheel 3.10" diameter; .244" shaft, 1.76" high, .18" rubber edge thickness; Zenith Cobramatic S-16922, S-21754 | $45=rebuild |
 | ||
| [1] G1480-01 phonograph cycle wheel 3.18" OD; .160" setscrew-hole; .37" high | $40=exchange | Sell=$79 |
| 1480-01 fits: Collaro 58-41, (TC-340, TSC-640, TSC-740); Magnavox 5226806-1, 523165-1 (F200, J200, K600, S600) |
| The 1480-01 phonograph cycle wheel is IN-STOCK for prompt shipment after your dud tradein arrives. | |
 |
 |
| Phonograph Drive Wheel for 92FM421 Motorola | $45=rebuild |
 |
| Magnavox F-200C |
Tech Tip: Phono Motor "runs slow" (or doesn't run): Most likely--the motor bearings are "gummed up" --take apart the motor & clean the bearings with Rubbing Alcohol; then lubricate them. Phonolube (2-ounce tube) GC10-1223 @ $14.90 Also--clean and lubricate the moving parts of your changer mechanism & turntable bearings with Phonolube so everything moves freely. It is rare for phono motors to burn out.
| Pinch Rollers for tape recorders & players |
| EVG1488-04 pinch roller 1-3/16" OD; .220" bearing hole Recordio 591, 592, 602, 892 |
 |
| EVG1488-04 |
 |  |
 |  |
 |  |
| 1455 | 1455-01 | 1457 | 1458 | GC1488 | 1499-70 |
| Phonograph Turret Drive Wheels | |
| VM930 Record Changer Turret assembly (for GI motor) also for RCA changers built by Voice of Music | |
| 1432-S Idler Wheel is used with 1460, 1461, 1462 turrets on VM 930 assembly (price of idler wheel near middle of page above) | |
| [2] 1460 Turret 78-RPM: .187" bearing hole; rubber 3/16" wide X 1/2" diameter; metal .593" diameter | $21=exchange |
| 1460 turret (=VM3139, replaces obsolete 1470, 1490-04, 1495-03, 1495-07) | |
| [6] 1461 Turret 45-RPM: .187" bearing hole; rubber 3/16" wide X 1/2" diameter; metal .283" diameter | $30=exchange |
| 1461 turret =VM3140 (replaces obsolete 1471, 1490-05, 1495-02, 1495-06) | |
| [2] 1462 + [5] 1462-S (stepped metal) Turret 33RPM; .187" bearing hole; rubber 3/16" wide X 1/2" diameter; metal .278" diameter | $30=exchange |
| 1462 turret =VM3141 replaces obsolete 1472, 1490-06, 1490-06-S, 1495-01, 1495-01-S, 1495-05) | |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
 |
 |
 |
 |
| VM 930 Turret Assembly | E-Clip | Speed Spindle | Motor Shaft |
| [1] 1463 78-RPM turret .950" OD for Webcor & General Electric (use with 1440 idler) | $30 = exchange |
| [1] 1464 45-RPM turret .750" OD for Webcor & General Electric (use with 1440 idler) | $30 = exchange |
| [none] 1465 33-RPM turret .840" OD for Webcor & General Electric (use with 1440 idler) |
 |
| EVG1463 |
| [0] 1466 phonograph 78-rpm turret drive has .120" bearing hole | |
| 1466 turret .500" Diameter (use with 1434 idler for Alliance motor version of RCA RP190 & RP205) | |
| [4] 1467 phonograph 45-rpm turret has 19/64" metal diameter, 1/2" rubber diameter .120" bearing hole Crescent, Motorola, RCA, VM | $30.00=exchange |
| 1467 turret .500" Diameter (use with 1434 idler for Alliance motor version of RCA RP190 & RP205) | |
| [16] 1468 phonograph 33-rpm turret drive 7/32" metal diameter, 1/2" rubber diameter; .120 bearing hole Crescent, Motorola, RCA, VM | $30.00=exchange |
| 1468 turret .500" Diameter (use with 1434 idler for Alliance motor version of RCA RP190 & RP205) | |
| RCA102972 16-RPM turret (use with 1434 idler for Alliance motor versions of RCA RP190 & RP205 & 7-HF-5) | |
| [10] 1470 =1495-03 phonograph 78-rpm turret drive, has .187" bearing hole, 5/8" metal diameter, 1/2" rubber diameter | $30=exchange |
| [2] 1471 phonograph 45-rpm turret, has .187" bearing hole, 5/16" metal diameter, 1/2" rubber diameter | $30=exchange |
| [1] 1495-04 phonograph 16RPM turret drive, .187" bearing hole, 1/4" metal OD, 37/64" rubber OD, fits GI motor version of RCA RP190, RP205 | $30=exchange |
| bearing hole size estimation: #10-24 stove-bolt = .183" #10-32 machine screw & 3/16" drill bit = .187" | |
| Replacement Switches for Voice of Music (VM-built) Record Changers | |
| GC1495-20 metal AC power switch VM21338 (old-467) for VM 900-series & early 1200-series, also Admiral RC180 Record Changers | ($12.00) |
| [1] GC1495-35 "Molex 1500" 3-post AC power switch: VM33945 (clear) & VM45850 (amber) for Motorola, Symphonic, VM, Zenith record changers | $20.00 |
| Rubber Cleaner & Revitalizer Rejuvinator for phono idler tires | |
| MS-21-1 =10008 Re-Grip rubber cleaner revitalizer rejuvinator 1 oz for idler tires & pinch rollers | $9.90 |
| 36-150 Lubriplate white grease for sliding parts & gears | $2.42 |
| GC10-1223 Phonolube (2-ounce tube) | $14.90 |
| [5] 1499-01 Rubber Phono Motor Mounts 9/pak: General Industries, RCA, Voice of Music, Wollensak BI14207, T1600, 149-08, 1794, Zenith | $15.20 |
| 1499-01 replaces: General Industries 14536, 24626-1; RCA 76751, 103948; VM 6631; Wollensak 01142000 (1280); Zenith 01142000 (812) | |
 | |
| EVG1499-01 | |
| Popular Flat Belts for Phonograph Turntables |
| FRM11.2 |
| FRM15.2 |
| FRX15.2 |
| FR19.6 =1407-514 flat 19.600 x .350 belt |
| FR20.0 flat 20.0 x .185 belt |
| FRX20.7 flat 20.7 x .210 belt |
| 1407-221 flat 20.749 x .250 belt |
| FR21.5 =1407-235 flat 21.563 x .188 belt |
| FRX22.4 flat 22.3 x .155 belt |
| 1407-192 flat 23.227 x .188 belt popular Phono |
| FBX23.6 =1407-553 =FRX23.6 flat 23.600 x .185 most popular Phono |
| FR23.6 flat 23.6 x .210 belt |
| 1407-222 flat 23.936 x .188 belt Phono |